Hold dig opdateret
Dette produkt er midlertidigt ikke på lager. Giv os din e-mailadresse, så giver vi dig besked så snart det er på lager igen.
Vi bruger kun din e-mailadresse til at sende dig en engangsnotifikation.
Dette produkt er i øjeblikket ikke på lager eller udgået. Kontakt vores kundeservice for et alternativt produkt.
Profil | Twin Rocker-Camber-Rocker |
---|---|
Stil | All-Mountain |
Form | Directional Twin |
Flex | Medium |
Type base | Sintered |
Camrock
A unique rocker/camber pattern defined by evenly balanced tip and tail rocker and camber between the bindings. Camrock improves freestyle finesse by keeping your tips playful while maintaining the power and pop of camber underfoot.
Underbite
UnderBite edges re-distribute a rider’s weight in such a way that it enhances turning ease and edge hold. Creating divots inward at the binding area reduces and disrupts the surface area of the edge that has contact with the snow while the board is turning. This increases the edge pressure by distributing your weight/energy in the areas where you need it - from the binding out, and through the center of the board where the carving arc is taking place. This segmentation of the sidecut into 3 key zones focuses your body weight onto areas that initiate, hold and release turns.
Full poplar
Yes baseline core for tip to tail wood-core snowboard construction. Strikes a predictable balance between durability, consistent flex and light weight.
Biax
A dual-direction, dual-layer, stitched fiberglass laminate that provides a fun, forgiving and snappy ride.
Sintered Spec Base
This is the term Yes uses and is the grey zone many companies play in. They call it Sintered Spec because it’s hardness and chemical properties are very close to true sintered and it’s on-snow performance is also very close to true sintered - but it’s formed using the extrusion process. How? – Well the raw material is actually pre- consumer recycled (meaning it never left the factory) sintered base material. So while the heating and extrusion process has softened it slightly, it’s still much harder than true Extruded.
Model | YES Typo 2016 - 2017 | |||||||
---|---|---|---|---|---|---|---|---|
Size | 149 | 152 | 155 | 156W | 158 | 159W | 161 | 163W |
Tip Length (cm) | 20.5 | 21 | 21.25 | 21.25 | 21.25 | 22 | 22.5 | 23 |
Tail Length (cm) | 20.5 | 21 | 21.25 | 21.25 | 21.25 | 22 | 22.5 | 23 |
Effective Edge (cm) | 113 | 115 | 117.5 | 118.5 | 120 | 120 | 122 | 123 |
Contact length (cm) | 108 | 110 | 112.5 | 113.5 | 115 | 115 | 116 | 117 |
Waist Width (cm) | 24.8 | 25 | 25.1 | 25.9 | 25.3 | 26.1 | 25.4 | 26.3 |
Tip Width (cm) | 29.13 | 29.37 | 29.54 | 30.29 | 29.81 | 30.61 | 29.91 | 30.77 |
Tail Width (cm) | 29.13 | 29.37 | 29.54 | 30.29 | 29.81 | 30.61 | 29.91 | 30.77 |
Rocker / Camber (cm) | R3 / C3 / R3 | R4 / C4 / R3 | R4 / C4 / R3 | R4 / C4 / R3 | R4 / C4 / R3 | R4 / C4 / R3 | R4 / C4 / R3 | R4 / C4 / R3 |
Sidecut | 7.7 / 7 / 7.7 | 7.9 / 7.2 / 7.9 | 8.1 / 7.4 / 8.1 | 8.2 / 7.5 / 8.2 | 8.3 / 7.6 / 8.3 | 8.3 / 7.6 / 8.3 | 8.5 / 7.8 / 8.5 | 8.6 / 7.9 / 8.6 |
Ref Point (cm) | 55.88 - 22.0 | 57.15 - 22.5 | 58.42 - 23.0 | 58.42 - 23.0 | 56.69 - 23.5 | 56.69 - 23.5 | 60.96 - 24.0 | 60.96 - 24.0 |
Setback | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 |
Min Stance Width (cm) | 51.9 - 20.4 | 53.2 - 20.9 | 54.4 - 21.4 | 54.4 - 21.4 | 55.7 - 21.9 | 55.7 - 21.9 | 57.0 - 22.4 | 57.0 - 22.4 |
Max Stance Width (cm) | 59.9 - 23.6 | 61.2 - 24.1 | 62.4 - 24.6 | 62.4 - 24.6 | 63.7 - 25.1 | 63.7 - 25.1 | 65.0 - 25.6 | 65.0 - 25.6 |