Indlæser...

Jones Project X 20/21

Kun %1 tilbage

Dette produkt er i øjeblikket ikke på lager eller udgået. Kontakt vores kundeservice for et alternativt produkt.

Specifikationer
Profil Twin Rocker-Camber-Rocker
Stil All-Mountain, Freestyle, Carve
Form Directional Twin
Flex Stiv
Type base Sintered

Hurtigt overblik

The Project X is a razor sharp, ultralight all-mountain board that rides like a luxury sport sedan - powerful, with impeccable handling and a comfortable flex. Jones’ Board Engineer Xavier Nidecker designed the Project X to reflect the future of snowboard production.

It’s built with the most advanced materials and construction technologies including a unique variation of ULTRA Construction that features multiple layers of Fusion Tech and Textreme Carbon instead of a traditional topsheet/fiberglass. The edges of the Spoon nose are beveled up for improved float and turn fluidity while the tail edges are beveled up for less catch. The Project X features a limited edition, hand numbered serial badge and an advanced fiberglass that improves strength by 15% without adding weight.

Detaljer

PROFILE

  • Blunt Nose
    Wider capped nose. As a result, you plow less through the snow and it looks like you have a longer nose. You also get a lower swing rate.


CORE

  • FSC Fusion Core
    Jones's lightest wood core to date. Made primarily of Paulownia with specially placed Poplar pockets for durability and response.

  • Ultra Construction
    Ultra Construction is the redefinition of what it takes to build a snowboard. Jones has tested every inch of the board to precisely position materials exactly where they are needed while eliminating all excess materials. Combining these innovative construction techniques with superlight wood cores and carbon fiber deliver revolutionary results. Jones ultra boards are the lightest, yet most durable snowboards on earth.

  • Super Sap Bio Resin
    All Jones boards are now built with bio-based, renewable epoxy instead of petroleum based epoxy. The raw materials used to make Super Sap Bio-Resin are coproducts or waste products of other plant based industrial processes. Producing Super Sap requires 33% less greenhouse gas emissions than conventional epoxy.


TOPSHEET

  • Eco-Plastic Topsheet
    Made from Castor beans. Also called wonder beans. This Eco-friendly material is ultra-light, more scratch-resistant and water and snow resistant. 

  • Float Pack Inserts
    An extra set of float inserts with heavy setback for the extreme powder days.

  • Fiberglass Reinforcement
    Fiberglass layer improve pop in nose and tail plus increases the longevity of the flex profile. This lightweight layer helps the board perform the same on day 100 as it did on day one - precise and playful.


BASE

  • Ultra Base
    World class racing base made of Ultra-High Modular Weight Polyethylene (UHMW-PE) optimized with special Fluorine and Paraffin. 25% more wax absorption, better glide in all conditions and better wear resistance. The Ultra base is harder and faster than any other Jones base.

  • Wend Natural Wax
    Jones boards are ready to shred straight out of the shop and are factory waxed with WEND natural wax.

  • Factory Tuned
    All Jones snowboards are factory de-tuned at the tip and tail so you can go right from the shop to the mountain.


SIDEWALL

  • Thin Recycled Edges
    Advancements in ski edge durability allow us to use thinner edges on splitboard inside edges (and Project X outside edges) to save weight. Outside edges are 2mm, inside edges are 1.5mm.

  • Recycled ABS
    Jones recycles as much of the base materials as possible to minimize the impact on the environment. So the base of the board above can be 'inverted' (flipped). By always reversing the colors of the base, as little base material as possible is wasted. We cannot therefore promise you a base variant as we also receive them differently.

  • Progressive Sidecut
    By increasing the sidecut radius towards the contact points, the board gets a smooth entry and exit phase during your turns.

  • Traction Tech
    Traction Tech is the Jones equivalent of the better known Magne-Traction. Traction-Tech is a slight wave in the steel side. This gives more grip, because it cuts deeper and sharper in snow or ice. Traction-Tech comes in 3 variants from Jones: 1.0, 2.0, 3.0. The number stands for the number of undulations per steel edge. More undulations means more grip, but also a more aggressive character of the board.

Jones Project X 20/21 Sizechart
Size 156
Sidecut Radius (m) 7.2
Rider Weight (lbs) 150 - 200
Stance Setback (mm) 20
Effective Edge (mm) 1160
Tip Width (mm) 303
Tail Width (mm) 293
Width Regular
Waist Width (mm) 254